Ortofon 2M Red MM Cartridge
The 2M Red and 2M Blue are designed for precise and accurate retrieval of the information in the record groove. Indeed, it is Ortofon's lasting philosophy to only ever play the recorded sound, without colouration. To obtain a flat frequency response, as with a Moving Coil cartridge, Ortofon are using split pole pins in the 2M design, to reduce the eddy current.
Improved engine, which provides an output of 5.5mV
Optimised sound reproduction and high level of sonic accuracy
Tipped Elliptical diamond
Split pole pins with a copper wire
All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7)
Stylus brush included
TECHNICAL INFORMATION
OUTPUT VOLTAGE (AT 1KHZ, 5CM/SEC)
5.5mV
CHANNEL BALANCE AT 1KHZ
1.5dB
CHANNEL SEPARATION AT 1KHZ
22dB
CHANNEL SEPARATION AT 15KHZ
15dB
FREQUENCY RANGE (AT -3DB)
20Hz - 22kHz
FREQUENCY RESPONSE 20HZ - 20KHZ
+3 / -1dB
TRACKING ABILITY AT 315HZ
Typically 70μm
COMPLIANCE, DYNAMIC, LATERAL
20μm / mN
TRACKING FORCE RANGE
1.6 - 2.0g (16 - 20mN)
STYLUS TYPE
Elliptical
STYLUS TIP RADIUS R / R
8 / 18μm
TRACKING FORCE RANGE
1.6 - 2.0g (16 - 20mN)
RECOMMENDED TRACKING FORCE
1.8g (18mN)
TRACKING ANGLE
20º
STYLUS TYPE
Elliptical
STYLUS TIP RADIUS R / R
8 / 18μm
TRACKING ANGLE
20º
RECOMMENDED TRACKING FORCE
1.8g (18mN)
INTERNAL IMPEDANCE / DC RESISTANCE
1.3kΩ
INTERNAL INDUCTANCE
700mH
RECOMMENDED LOAD RESISTANCE
47kΩ
RECOMMENDED LOAD CAPACITANCE
150 - 300pF
CARTRIDGE COLOUR BODY / STYLUS
Black / Red
CARTRIDGE WEIGHT
7.2g
REPLACEMENT STYLUS UNIT
Stylus 2M Red
ACCESSORIES
1 x Stylus Brush
1 x Screwdriver
2 x Screw M2.5 x 5
2 x Screw M2.5 x 7