QED XT400 Speaker Cable

X-Tube™ Technology

At low frequencies both X-TubeTM and conventional stranded/solid core speaker cables convey signals in a linear way. However, at high frequencies, X-TubeTM retains a near-linear signal transfer, whereas the conventional cables fail to conduct uniformly across the entire conductor area.

In standard speaker cables at high frequencies current flow is highest at the periphery with rapidly deteriorating current density towards the centre of the conductor.

The effect of this is to reduce the actual cross sectional area of the cable at 15kHz to less than 75% of that at low frequencies. This results in higher distortion and compromises the performance of the cable.

X-TubeTM with polycore technology exhibits much lower self-inductance and is therefore less affected by this problem. The polycore technology reduces loop inductance to levels only achievable using more costly and difficult to terminate cables.

The result is more high frequency detail, less distortion and greater performance.

Silver plated 99.999% oxygen free copper conductors

Provides a low frequency path for the audio signal and delivers stunning high frequency detail

WIRE GAUGE

• 12 AWG

JACKET OD

• 6.00 mm

CROSS-SECTIONAL AREA

• 4.00 mm²

LOOP RESISTANCE

• 0.008 Ω/m

CAPACITANCE

• 43 pF/m

INDUCTANCE

• 0.50 µH/m

DISSIPATION FACTOR

• 0.0400