Dali Spektor 1, Ex Display
Built around a 4½” wood fibre woofer and a 21 mm soft dome tweeter, the Dali Spektor 1 is perfect for almost any situation that requires a small but well performing speaker. Front, rear or side speakers in a surround system, or alone in a compact stereo setup.
Built around a 4½” wood fibre woofer and a 21 mm soft dome tweeter, the Dali Spektor 1 is perfect for almost any situation that requires a small but well performing speaker. Front, rear or side speakers in a surround system, or alone in a compact stereo setup.
Built around a 4½” wood fibre woofer and a 21 mm soft dome tweeter, the Dali Spektor 1 is perfect for almost any situation that requires a small but well performing speaker. Front, rear or side speakers in a surround system, or alone in a compact stereo setup.
WOOD FIBRE CONES
Dali’s low-loss drivers use a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.
LOW SIGNAL LOSS
By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables Dali to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero.
AMPLIFIER FRIENDLY
The amplifier friendly design makes the SPEKTOR series a perfect fit for almost any of the amplifiers in its price category. No matter if we look at compact Hi-Fi, stereo amplifiers or surround receivers, Dali Spektor 1 will bring out the best in them, showing you just how good music and movies can sound.
SOFT DOME TWEETER
The dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).
Frequency Range (+/-3 dB) [Hz]
59 - 26,000 Hz
Sensitivity (2,83 V/1 m) [dB]
83.0dB
Nominal Impedance [ohms]
6 ohms
Maximum SPL [dB]
103 dB
Recommended Amplifier Power [W]
40 - 100 Watt
Crossover Frequency [Hz]
2,100 Hz
Crossover Principle
2-way
High frequency driver, Quantity
1 x 21 mm
High frequency driver, Diaphragm type
Soft Textile Dome
Low frequency driver, Quantity
1 x 4,5"
Low frequency driver, Diaphragm type
Wood Fibre Cone
Enclosure type
Bass Reflex
Bass Reflex Tuning Frequency [Hz]
58.0 Hz
Dimensions (HxWxD) [mm]
237 x 140 x 195 mm