Ortofon 2M Black MM Cartridge
The new Ortofon 2M headshell is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their tonearm. The combination of 2M Headshell and 2M Series cartridge adds unique distinction to the turntable! The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.
Special upgraded engine, featuring split pole pins with a silver plated copper wire
Shibata diamond stylus tip
Detailed sound reproduction throughout the spectrum, including even the most high frequency groove information
Reduced distortion and record wear
Cartridge body made from highly rigid and resonance eliminating materials
Improved dynamics and resolution, sounds more open and reproduces greater details
Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7)
Carbon fibre stylus brush and tracking force gauge included
The new Ortofon 2M headshell is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their tonearm. The combination of 2M Headshell and 2M Series cartridge adds unique distinction to the turntable! The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.
Special upgraded engine, featuring split pole pins with a silver plated copper wire
Shibata diamond stylus tip
Detailed sound reproduction throughout the spectrum, including even the most high frequency groove information
Reduced distortion and record wear
Cartridge body made from highly rigid and resonance eliminating materials
Improved dynamics and resolution, sounds more open and reproduces greater details
Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7)
Carbon fibre stylus brush and tracking force gauge included
The new Ortofon 2M headshell is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their tonearm. The combination of 2M Headshell and 2M Series cartridge adds unique distinction to the turntable! The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.
Special upgraded engine, featuring split pole pins with a silver plated copper wire
Shibata diamond stylus tip
Detailed sound reproduction throughout the spectrum, including even the most high frequency groove information
Reduced distortion and record wear
Cartridge body made from highly rigid and resonance eliminating materials
Improved dynamics and resolution, sounds more open and reproduces greater details
Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7)
Carbon fibre stylus brush and tracking force gauge included
OUTPUT VOLTAGE (AT 1KHZ, 5CM/SEC)
5mV
CHANNEL BALANCE AT 1KHZ
1dB
CHANNEL SEPARATION AT 1KHZ
26dB
CHANNEL SEPARATION AT 15KHZ
1-5dB
FREQUENCY RANGE (AT -3DB)
20Hz - 31kHz
FREQUENCY RESPONSE 20HZ - 20KHZ
+2 / -0dB
TRACKING ABILITY AT 315HZ
Typically 80μm
COMPLIANCE, DYNAMIC, LATERAL
22μm / mN
STYLUS TYPE
Nude Shibata
STYLUS TIP RADIUS R / R
6 / 50μm
TRACKING FORCE RANGE
1.4 - 1.7g (14 - 17mN)
RECOMMENDED TRACKING FORCE
1.5g (15mN)
TRACKING ANGLE
20º
INTERNAL IMPEDANCE / DC RESISTANCE
1.2kΩ
INTERNAL INDUCTANCE
630mH
RECOMMENDED LOAD RESISTANCE
47kΩ
RECOMMENDED LOAD CAPACITANCE
150 - 300pF
CARTRIDGE COLOUR BODY / STYLUS
Black / Black
CARTRIDGE WEIGHT
7.2g
REPLACEMENT STYLUS UNIT
Stylus 2M Black
ACCESSORIES
1 x Stylus Brush (Carbon Fibre)
1 x Screwdriver
2 x Screw M2.5 x 5
2 x Screw M2.5 x 7
1 x Stylus Pressure Gauge